BORE CLEANER - Highly effective concentrated paste formula that lasts longer and takes less time to clean with than ordinary liquid or aerosol type cleaners. Because it is a paste it cannot spill or run into wood stocks, grips or mechanisms causing chemical damage. Iosso Bore Cleaner removes copper, lead, carbon burn, powder fouling, plastic wad residue, and surface rust. It is non-corrosive, non-flammable and has no offensive odors or mists. Use with the Eliminator Brushes and Eliminator Triple Action Oil Solution for complete cleaning
|
This triple action solution cleans, lubricates and protects. It penetrates to loosen powder, carbon, and plastic wad. It's is an excellent lubricant for parts, and inhibits corrosion. For Bore cleaning, apply the solution to a patch, run it through the bore several times. Next apply Iosso Bore Cleaner sparingly to an Eliminator Brush. Run through the bore one or more times and follow with clean, dry patches until one comes clean. Lastly, moisten a patch with solution and run through the bore. Follow with a clean dry patch. This solution is biodegradable, has no petroleum distillates, or ammonia. This solution will not freeze or dissipate in hot weather. It lubricates in extreme temperatures to avoid weapon jamming. Works to -74F(-65C). This bio-based formula is made from plant extracts. While keeping our environment healthy, it also reduces our dependence on foreign resources
|
GUN BRITE - Safe for use on factory blued, stainless steel, chrome and nickel guns. It removes powder fouling, surface rust, tarnish and discoloration from the barrel and stubborn black rings from the face of the cylinder. The polish leaves behind a non-oily protective coating that resists fingerprinting and moisture
|
 |
| the casings are not included |
|
|
IOSSO CASE CLEANER & CASE CLEANER KIT - Restores brass casings to a bright finish in seconds. This liquid cleaner effectively removes powder fouling residue, oxidation, tarnish, discoloration, dirt, and grime. It cleans the inside of the casings and the primer pocket where tumbling media is not effective. Just immerse the casings in the solution for from 20 seconds up to five minutes, rinse, and dry. The Case Cleaner solution is reusable and economical. A quart of IOSSO case cleaner cleans approximately 1500 casings depending upon the degree of tarnish, residue and size. Case Cleaner is available in quarts or gallons or in a convenient kit. The Kit contains a quart of Case Cleaner, a bucket and strainer bag. Environmentally friendly. Use IOSSO Case Polish after cleaning for a high a polish and protection against tarnish
|
IOSSO products are American Made and of high quality. They make tons of cleaning and marine products that work wonderfully - I use their sealer on my show tents and have never had a leak.
These premium brushes are made with NYFLEX fiber, which holds its shape well and allows for back and forth action, unlike brass and bronze type brushes. They may be used several times before becoming worn. The brushes are wound tightly to allow for more cleaning area per inch. When used with the Iosso Bore Cleaner and Iosso Gun Oil, they will remove nasty carbon burn and all other fouling, including copper and lead.
|
| AR-15 / AR-10 NEW!---This cleaning kit contains 6 precision fit brushes. The brushes clean the Upper Receiver, Chamber, Bolt Carrier, .223 bore(AR-15),or .30 bore(AR-10), Bolt Carrier Key Tube, and the Gas Tube. The Gas tube brush cleans the entire length of the gas tube without disassembly of the upper receiver. The kit also includes the Eliminator Cleaning Tool & Rod. This cleaning tool is handy for tight cleaning jobs where a regular rod is too long and cumbersome to use. This short sturdy tool is useful with any Eliminator Brush to clean pistol bores, chambers, revolver cylinders, case cleaning, neck turning, etc. Use it with the Bolt Carrier Key Brush, Bolt Carrier Brush and as a handle to attach the Eliminator Bore Cleaning Rope (also included).When the extension rod is attached, it is stationary and will not spin. Use it with the Upper Receiver Brush and Chamber Brush. It may also be used for any job that requires a longer handle. The Iosso Bore Cleaner and Eliminator Triple Action Oil Solution are recommended cleaners to be used with the kit (sold separately).
|
|
| AR-15 BRUSHES - Fitted for Precision Cleaning Cleaning an AR-15 has never been an easy task. There are no brushes that fit correctly for complete cleaning. Wrapping a patch around a brush to make it fit and using tools to scrape away the fouling is not foolproof. A new brush kit designed for the AR-15 is now available to take all the guesswork out of the cleaning. This kit contains an Upper Receiver Brush, Bolt Carrier Brush, Chamber Brush and .223 Bore Brush. These unique brushes are superior because they are sized to tolerance for precision cleaning. They are made out of a blue Nyflex fiber, which is a stiff, thick fiber that holds its shape well and allows for back and forth action unlike traditional brass and bronze type brushes. They may be used several times before becoming worn. The brushes are wound tightly so there is more cleaning area per inch. The shank is a solid construction, sized to fit 8/32 cleaning rods. When used with the Iosso Bore Cleaner and Iosso Gun Oil, it will remove nasty carbon burn and all other fouling, including copper and lead
|
|
| AR-10 BRUSHES - Cleaning an AR-10 has never been an easy task. There are no brushes that fit correctly for complete cleaning. Wrapping a patch around a brush to make it fit and using tools to scrape away the fouling in not foolproof. This new kit takes all the guesswork out of cleaning. The kit contains an Upper Receiver Brush, Bolt Carrier Brush, Chamber Brush, and .30 cal Bore Brush. The brushes are superior because they are sized to tolerance for precision cleaning. They are made out of a distinctive blue fiber that is very thick and stiff which holds its shape well and allows for back and forth action unlike traditional brass and bronze type brushes. They may be used several times before becoming worn. The brushes are wound tightly to allow for more cleaning area per inch. The shank is a solid construction sized to fit 8/32 cleaning rods. When used with the Iosso Bore cleaner and Iosso Gun Oil, it will remove nasty carbon burn and all other fouling, including copper and lead
|
|
ELIMINATOR BORE BRUSHES These premium bore brushes are made with our new Nyflex fiber. The new brush fiber is cobalt blue in color so it can’t be mistaken for any other type brush. This thicker and stiffer grade of fiber holds up well to many types of cleaners and is meant to replace the old bronze and brass brush types. This brush is wound tighter and has more fiber per inch than any other brush. The shank is a solid construction and has a brass core. It may be used many times before wearing out. The Eliminator is available in rifle, pistol, shotgun, and black powder sizes. Use with the IOSSO Bore Cleaner and IOSSO Gun Oil to drastically reduce cleaning time and result in an unbelievably clean bore
| |
|
| LONG HANDLED BRUSHES / 2-PACK - These premium brushes are made on a handle for quick and easy cleaning. The same thick and stiff blue fiber holds its shape well and allows for back and forth action unlike brass and bronze type brushes. They may be used several times before becoming worn. The brushes are wound tightly to allow for more cleaning area per inch. When used with the Iosso Bore Cleaner and Iosso Gun Oil, it will remove nasty carbon burn and all other fouling, including copper and lead
|
|
| CASE POLISH - Cleans and polishes brass casings to a high luster. It removes powder fouling, residue, oxidation, tarnish, and discoloration. Add Iosso Case Polish to your media before tumbling. It works with the media to reduce tumbling time and gives your brass a like-new finish. Use Iosso Case Polish on soiled casings or on casings that have been pre-cleaned with the Iosso Case Cleaner. This is an 8 oz can of polish. Use 2 tablespoons polish per pound of walnut shell. Lenth of run depends on how bad the cases are and whether you are using rotary (slower) or vibratory (faster) tumblers.
Use this link to go to the crushed walnut shell media.
|
|
|
